When mounting a TV to the wall, how do you plug in your wires?

Does the Bracket Tilt or something so that you can plug the wires to the tv or do you have plug them in before putting the tv on your wall???

LOL good question

some models, the stand can actually pull pulled out
on others
u gotta do it before, and that wud be a biatch if u jus bought a new playstaion or DVD player

Visonic PL-1/0-1711-1 Outdoor PIR Detector for Low Voltage Control Applications $48.99 PL-1 is a passive infrared motion detector designed for outdoor low voltage control applications such as control of gates, lights, CCTV cameras etc. A special built-in photocell and light level control can be activated to limit operation to periods of dar…

Go Power! ARM-UNI Tilt Mount Kit $79.99 The Go Power! adjustable roof mount is used to tilt your panels towards the sun. This works very well for increasing the amount of power you can capture, espescially in the winter months when the sun is low on the horizon. Using the tilt kit in the winter months can produce up to 40% more power. Summertime campers will see 4% increase in power. All instructions are provided….

Interion Large Tilt Wall Mount for 34-60 TVs $24.99 Laterally adjustable TV brackets allow the I92-40937 mount to shift left and right on the wall plate for perfect placement, even with off-center wall studs….

Savage Continuous Light Kit, Head with Reflector, and Tilting Bracket (Bulbs not included) Includes a cylindrical standard 7.8″ reflector. This light comes with a tilting bracket and accepts the same accessories as the Savage FT150. Bulb sold separately: Use general household or an E-27 bulb…

Adjustable Tilting Wall Mount Bracket for LCD Plasma (Max 33Lbs, 10~26inch) $6.89 This high quality tilting wall mount is perfect for computer monitors or small televisions. Featuring a low profile design that sits 1.65″ from the wall and the ability to tilt up to 15 degrees, this mount is as functional as it is visually appealing. Made from high-grade steel. Very sturdy and easy to install. Ideal for new and slim LCD and LED TVs. Wall plate dimensions are 3.9″ by 3.9″. Th…

3M Easy-Adjust Monitor Stand (MS110MB) $45.88 Height easily adjusts up and down through 5″ range. Swivels 270° and tilts forward and back 30° for optimal ergonomic positioning. Monitor can rotate to portrait or landscape. Capable of holding monitors up to 16 lbs. and fits both 75 X 75 mm and 100 X 100 mm VESA-D monitor bolt hole patterns. Stand Type: Monitor Width: 8 1/2 in Depth: 5 1/2 in Maximum Height: 16 in.Unit of Measure : Each…

Adjustable Tilting SINGLE Desk Mount Bracket for LCD(Max 33Lbs, 10~23inch)- Black $25.62 Product DescriptionAdjustable Tilting SINGLE Desk Mount Bracket for LCD (Max 33Lbs, 10~23inch) – BlackReplace your Monitors desktop stand with this height adjustable model to set your display at the optimal height, tilt and angle to reduce eye and neck strain.  A stable “V” shaped base gives your monitor a stable foundation.Tilt:  -30 ~ -30 degrees Swivel:  360 degree…

VideoSecu Portable Adjustable DVD CD Player Mount for Car Headrest- Black Color MDC20 M25 $9.40 The VideoSecu DVD mount is designed for mounting portable DVD player to the car headrest. Mount the DVD player to the back of the front seat, for the passengers in the back seat to view. Adjustable arms fits different size DVD player up to 10 inch wide, and is compatible with most cars. The adjustable tilt function provides comfortable viewing angle and reduce screen glare. This mount bracket is…

Thule 665C Transporter Combi Hitch-Mount Cargo Box $476.95 Full featured hitch cargo box with tilt down design allows for partial access to trunk, hatch or tailgate.Features * SecureLock� ensures that all gear is locked and box is properly closed prior to driving * Carries 13 cubic feet or up to 150lbs of cargo per box * Pre-wired tail lights (4-pin) and license plate adapter included * 1 One-Key lock included to secure box contents * …

Ppyple Dashview car holder mount for Samsung Galaxy S2, SII with handsfree, car charger $39.99 Included in package: Dashview car mount, Aux cable, Micro USB cable (for charging), car USB charger/adapter. Talk hands-free on your Galaxy S2 phone while it charges, with Dashview Car Mount. Leave your Galaxy S2 phone set it in adjustable charging cradle. The flexible keeps your Galaxy S2 Phone just where you want it: always within reach. For great-sounding tunes, plug in to your car stereo’s AU…

14” to 37” Flat Panel Triple Arm Articulating Tlit & Swivel TV Wall Mount $35.99 The Pyle-Home Home Flat Screen Mount is made from high strength steel and painted to prevent corrosion and create a clean, professional appearance for your installation. This wall mount bracket can easily support televisions from 14 to 37 , has a weight capacity of 55 lbs. It features tilting abilities and can be set 2.8 and also extend 15.6 from the wall. This mount is VESA compatible and features a 7.8 x 7.8 interface size.

2 Way Adjustable Tilting Wall Mount LCD LED Bracket Max 33Lbs, 13 -23 – Silver $31.5 2 Way Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Silver This attractive articulating wall mount features a long extention arm with a ball and socket throat that allow it to be angled in multiple directions. The sturdy wishbone style arm provides a rigid hold. The high adjustable wall assembly allows you to set it at the perfect height. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

3 Way Adjustable Tilting Desk Mount Bracket for LCD Max 33Lbs, 10-25inch Black $26.99 3 Way Adjustable Tilting Desk Mount Bracket for LCD LED (Max 33Lbs, 10~25inch) – Black Edge clamp, desktop mount for Flat Panel Displays. This high quality, steel mount allows you to conveniently attach your monitor to the edge of your desk, maximizing your desktop work space. Variable height adjustment brings your display to the perfect viewing height, preventing undue neck strain. Folding, jointed extention arm with a 376mm (about 14 4/5 )reach brings the screen closer to you when needed and swings out of the way when you don’t. A durable and attractive black powder coat finish and reliable clamps to give your display a sturdy foundation. Features: Fits VESA 50/75/100 mounting patterns (about 2 , 3 and 4 square mounting hole pattern). Tilts up and down swivels side to side. 376mm (about 14 4/5 ) folding, jointed, swing arm swivels 360 degrees. Height adjustable from 222 to 380mm (about 8 3/4 to 15 ). Steel construction throughout with welded base clamp. Compact low profile, small footprint design. Maximum thickness of mounting surface for desk clamp, 2.25 . *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

3 Way Adjustable Tilting Wall Mount Bracket 23~42 LCD (Max 88Lbs) TV Wall Mounts $34.5 Lion Strong oem YW-L009 TV Mounts for Flat Panel Displays at the lowest price. 3 Way Adjustable Tilting Wall Mount Bracket 23 – 42 LCD Max 88Lbs. TV Wall Mounts Wall Mount for Flat Panel Displays.it yourself and professional installers. This brand most recommended by flat panel manufacturers. It is a breakthrough in flat panel mount design, combining strength, easy installation and striking product design that is unparalleled in the industry. They take maneuverability, stability and security to the extreme with a unique look that is sure to match your flat panel. The Articulating LCD LED TV HDTV Wall Arm Mount supports most 23 to 42 inches midsize screens. It folds flat against the wall or extends out up to 20 inches. The two-link arm design provides tilt up and down 15 degrees and up to +/-90 degrees of swivel for virtually limitless viewing positions. Fits most 23 to 42 23 26 27 32 37 42 inch flat panel screens Fits VESA 50~75~100~200~00x100mm. Offers up to + or -90 degrees of swivel depending on screen model Hinged arm extends up to 20 inch Loading capacity up to 88 lbs / 40 kg Maximum flexibility for installing and viewing LCD LED TV and HDTV displays. Nesting arm design allows display to be folded parallel to the wall. Multi-directional adjustment tilts, swivels, and extends. Three pivot points for virtually limitless adjustment. Single stud mounting, Solid Heavy-gauge Steel Construction Standard mounting hardware include. Cantilever flat panel tv mount Material SPCC with coating finished, Tilt angle : -20 deg To +20 deg, Swivel:180 deg, For 23~42 inches TV, Max loading 40KGS. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75 mm apart horizontally and 75 mm a

32 -63 Dual Extended Arm Tiltiing & Swivel Wall Bracket Mount HDTV LCD PLASMA VESA 600×400 $62.95 Complete your home theater set-up with this?adjustable tilting/swiveling?wall mount that will accommodate your 32 -63 LCD/Plasma television.?This wall mount also features?an extra long extension arm that can?reach out up to 24 .? All wall mounts are perfect for installation in your home theater and boardrooms.?Securely and easily mount your LCD TV, flat panel and HD TVs like a pro with easy to follow-instructions. Adjustable/Tilting wall mount?installs your screen close to the wall for a perfect display for boardrooms, digital signage, or home theaters. The mount includes simple to align brackets and a unique wall plate that can be mounted to two wood studs, or concrete.

36” – 65” Flat Panel Tilting TV Wall Mount Bracket $38 Universal Mounts fits virtually any 36” to 65” plasma/LCD flat Panel Screen. One Touch tilt for effortless positioning and adjustment of the screen. Up to 12” of horizontal adjustment after screen is mounted. Mounts to wood/Metal studs, concrete cinder blocks (Accessories included). Universal brackets easily hook onto wall plate for fast installation. Weight Capacity: 132.27lbs (60kg). Interface size: 31” x 24”. Distance to the wall 3.2”. Viewing adjustment: 5 -15

Adjustable Tilt/Swivel Wall Mount Bracket for LCD LED Max 125Lbs VESA 400×300 $57.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma (Max 125Lbs, VESA 400×300) MPI’ MUA46 Articulating Wall Mount Bracket is perfect for LCD and LED displays. It can tilt 25 degrees and swivel 180 degrees. Made of sturdy, steel construction, it has a durable powder-black finish. Minimum Extension: 3.75 Maximum Extension: 24.65 125lbs Weight Capacity Fixed VESA compliant sizes on main bracket: 100×100 200×100 200×200 Variable VESA compliant sizes using extension brackets: Horizontal = 315- 345, 375- 405 Vertical = 30- 130, 215- 325 The box shows the VESA size to be 300×400. This is an approximation of the maximum VESA size available, incorrectly listing the vertical size first. MPI normally lists the horizontal size first on all mounting brackets.

Adjustable Tilt/Swivel Wall Mount Bracket for LCD LED Plasma Max 110Lbs 32 -60 $68.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma Corner Friendly (Max 110Lbs, 32~60inch) – BLACK This strong and robust TV wall bracket allows maximum flexibility for installing and viewing your TV. Ideal for corners. It allows you to tilt, twist, and swivel your TV into nearly any position you desire. Also has adjustment for lateral positioning. Backplate measures 45cm wide giving numerous fixing points, ideal for stud walls. Corner friendly design due to extension arm orientation. Check out the images! Features an extra long extension arm that can reach out up to 28.3 . The other model PID# 4563 extends 19.6 . That’s the difference. This mount is only compatible with standard 16 on center stud spacing. It will NOT work for studs that are spaced farther than 16 . Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Desk Mount Bracket for LCD LED Max 33Lbs, 13 -23 Black 6419 $33.84 Adjustable Tilting Desk Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Black This tilt type desktop mount is a perfect solution for flat panel displays. The desk bracket extends up from the desk 15 inches high so you don’t have to constantly stare downwards at you monitor, as the display will be about eye level and definitely more comfortable. Comes with edge mount desk clamps which virtually take up no desktop space, while at the sime time clearing up space for other desk supplies, a printer or that extra paper work. Tilt: -30 ~ -30 degrees Swivel: 360 degrees Max height: 400mm Max Weight: 15kg (33lbs) VESA: 75x75mm and 100x100mm Display Size: 13 to 23 * diameter is 1 1/8 *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Desk Mount Bracket for LCD LED Max 33Lbs, 13 -23 Black 6421 $40.61 Adjustable Tilting Desk Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Black This tilt type desktop mount is a perfect solution for flat panel displays. The desk bracket extends up from the desk 15 inches high and is able to swivel a full 360 degrees while extending out towards you 12.5 inches which will allow it to be viewed at a closer range. Comes with edge mount desk clamps which virtually take up no desktop space, while at the sime time clearing up space for other desk supplies, a printer or that extra paper work. Tilt: -30 ~ -30 degrees Swivel: 360 degrees Max height: 400mm Max Weight: 15kg (33lbs) VESA: 75x75mm and 100x100mm Display Size: 13 to 23 * Max Arm Length – 12.5 Min Arm Length – 6.25 *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Desk Mount Bracket for LCD Monitors – D100 $39.99 This high quality, steel mount allows you to conveniently attach your monitor to the edge of your desk, maximizing your desktop work space. Variable height adjustment brings your display to the perfect viewing height, preventing undue neck strain.

Adjustable Tilting LCD LED Plasma Wall Mount Bracket Max 165Lbs 32 -60 (No Logo) $38.99 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 32~60inch) – SILVER (No Logo) This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 32 to 60 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 4 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting QUAD Desk Mount Bracket for LCD Max 33Lbs, 13-23inch Black $111.39 Adjustable Tilting QUAD Desk Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Black Create of wall of video with this Quad Mount Desktop Display Frame for flat panel displays. Comes with edge mount desk clamps to take up virtually no desktop space. Tilt: -30 ~ -30 degrees Swivel: 360 degrees Max height of display mount: 640mm Max Weight: 15kg (33lbs) VESA: 75x75mm and 100x100mm Display Size: 13 to 23 * Poles are 750mm (29.53 ) high Crossbars are 1000mm (39.37 ) across. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting TV Mount Bracket for LCD Plasma (Max 165Lbs, 32~60inch) TV Mounts $213 Lion Strong oem SHB-033M TV Mounts for Flat Panel Displays at the lowest price. Bracket for LCD Plasma Max 165Lbs, 32 – 60 inch TV Wall Mounts. This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 32 to 60 flat panel screen and plasma TVs up to 165 lbs. This is perfect for boardrooms, digital signage, or home theaters. The back of the display will sit a 3 inches off the wall. The mount includes simple to align Tilt brackets and a unique wall plate that can be mounted to various wall constructions including wood studs, metal or concrete. SPECIFICATIONS for SHB-033M Type Tilting carry a Minimum VESA 100X100, Maximum VESA 1050×450, Maximum Weight 165 lbs, minimum Req. Display Size 32 Maximum Req, Display Size 60 Minimum. Extension 3 inches, Tilt: -15 deg ~ +15 deg. Construction Steel. Wall Plate Dimensions 28 x 8 7/8 Front Plate Dimensions. Built In Level yes, Notes: Extra wide. Compatibility: Will fit most small to mid-sized flat panel plasma and LCD TVs with mounting patterns up to VESA 900 X 470 mm. Mounting holes on television should be 28 inches or less apart horizontally & 18.5 inches or less apart vertically. Maximum weight capacity: 165lbs/75kg. Included in Box – Mount, Mounting hardware, User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in or mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically.

Adjustable Tilting TV Wall Mount Bracket for 32~55 LCD Plasma 165Lbs.TV Wall Mounts $25.99 Lion Strong oem DCYW-T007 Adjustable Tilting TV Wall Mount Bracket for 32 – 55 inches LCD Plasma 165Lbs.TV Wall Mounts 32 – 55 inches LCD Plasma 165Lbs.TV Wall Mounts. Adjustable Tilting Wall Mount Bracket for LCD Plasma 165Lbs, 32 – 55 inches. Supported VESA Patterns: Up To 600×400 Hole Pattern Coverage: Up to 29.7 Horizontally by 19 Vertically Fits most 32-55 TVs and up to 62. Max Capacity: 165 lbs Tilt Range: 12 deg Downward Built-in Bubble Level Wall Plate Dimensions: 30 x 9.5 inches dual stud installation Professional Black Powder Coat smooth Finish. This wall mount has a bubble level included in it’s frame work and a 6 inch level up on request. It offers up to 12 degrees of tilt while maintaining a slim 1.9 inches profile in flat position. The universal design fits virtually any 32-55 plasma or LCD TV. How can I tell if my TV is VESA compliant. Although the vast majority of TV’s are VESA compliant, there are some models that are not. Please consult your TV product manual for more information. Most manuals indicate the exact VESA standard necessary for mounting, or simply indicate the VESA mounts are supported in general. If this is the case, simply purchase a wall mount within the TV size guidelines of your TV. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in or mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically. Included in Box Mount, Mounting, hardware, User manual.

Adjustable Tilting TV Wall Mount Bracket for 32~56 LCD Plasma 165Lbs. TV Wall Mounts $27.99 Lion Strong oem DC432BPW TV Mounts for Flat Panel Displays at the lowest price. Adjustable Tilting TV Wall Mount Bracket for 32 – 56 inches LCD Plasma 165Lbs. TV Wall Mounts. Including a precision bubble of level to assure proper mounting angle4) Fits most large flat panel plasma and LCD TV. This is a tilting adjustable wall bracket for LCD, plasma, or LED televisions. This wall mount supports most 32 to 56 inches flat panel TVs up to 165 lb weight.The slim wall plate keeps the screen close to the wall for a very discrete installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align brackets and a unique wall plate that can be mounted to two wood studs, solid brick, or concrete DC432BPW Dimensions Wall plate: 28 x 8 7/8 inches. Measurements are from edge to edge. Mounting points for bolts will be shorter. Please see above. Range of Motion Tilt: 15 degree to 15 degrees down. Extension from wall: 4.0 inches. Design & Construction. Solid toughened steel construction Durable scratch resistant finish in Silver Easy. installation.Included in Box Mount Mounting hardware User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement inches or mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically.

Adjustable Tilting TV Wall Mount Bracket for 32~63 LCD Plasma 165Lbs. TV Wall Mount. $39.99 Lion Strong oem W39001 TV Mounts for Flat Panel Displays at the lowest price. Adjustable Tilting TV Wall Mount Bracket for 32 – 63 inches LCD Plasma 165Lbs. TV Wall Mount. slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 3 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete.Warning: This mounting bracket is not compatible with certain LG PIONEER and Sharp brand TVs. Will fit most small to mid-sized flat panel plasma and LCD TVs with mounting patterns up to VESA 750×450. Mounting holes on television should be 28 inches or less apart horizontally and 18.5 or less apart vertically. Maximum weight capacity: 165lbs/75kg. Dimensions Wall plate: 32 x 8 7/8 inches. Measurements are from edge to edge. Mounting points for bolts will be shorter. Please see above.Range of Motion. Tilt: o degree to 15 degrees down variable Swivel: None Extension from wall: .0 inches when parallel tothe wall Design & Construction. Solid toughened steel construction Durable scratch resistant finish in Black Easy installation. Included in Box. Mount Mounting hardware User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement (in mm). This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically.

Adjustable Tilting Wall Mount Bracket for LCD LED (Max 30Lbs, 10~24inch) Black $21.84 Adjustable Tilting Wall Mount Bracket for LCD LED (Max 30Lbs, 10~24inch) – Black The new high quality MLA100-S is an adjustable type wall mount bracket for most 10” to 24” displays. Steel construction provides unparalleled strength to keep your flat panel display safely and securely mounted to the wall. These articulating type mounts keep screens relatively close to the wall at 3.1” for easy accessibility to the cables behind your TV, while giving you the ability to tilt the mount 25 and being able to swivel it 60 which allows you to watch your display from different viewing angles. Sturdy Steel Construction Durable black powder coat finish Easy adjustments VESA compliant: 75×75, 100×100 Note: Check to see how far apart the mounting holes are on your display. This mount will fit displays that have mounting holes that are 75mm or 100mm apart from the left to the right and top to bottom. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Blac $29.35 Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Black This attractive articulating wall mount features a short extention arm with a ball and socket throat that allow it to be angled in multiple directions. The sturdy wishbone style arm provides a rigid hold. The high adjustable wall assembly allows you to set it at the perfect height. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Sil $29.35 Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 13~23inch) – Silver This attractive articulating wall mount features a short extention arm with a ball and socket throat that allow it to be angled in multiple directions. The sturdy wishbone style arm provides a rigid hold. The high adjustable wall assembly allows you to set it at the perfect height. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 80Lbs, 24~37inch) $15.49 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 80Lbs, 24~37inch) *Concrete / Brick Only* This high quality tilting wall mount features a slim design that sits a fixed distance of 1.65 from the wall and will allow for low profile installation of displays with a VESA compliant mounting pattern up to 200×200. Features: – Low profile design that sits a fixed 1.65 from the wall. – Tilts up to 15 degrees. – Supports VESA patterns: 75×75 100×100, 200×200. – Maximum load capacity: 80lbs (36kg). * This mount is designed for brick / concrete walls only – and not designed for use with wooden studs

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma – BLACK $34.99 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 23~42inch) – BLACK (No Logo) This is a tilting adjustable wall bracket for LCD, plasma, or LED televisions. This wall mount supports most 23 to 42 flat panel TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discrete installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align brackets and a unique wall plate that can be mounted to two wood studs, solid brick, or concrete. WARNING *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma Max 165Lbs 32 -60 WHT $38.99 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 32~60inch) – WHITE This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 32 to 60 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 4 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma Max 165Lbs, 32 -60 BLK $37.99 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 32~60inch) – BLACK This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 32 to 60 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 4 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma Max 165Lbs, 37~63inch $46.87 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 37~63inch) – Wide – Black This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 37 to 63 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 4 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. Warning: This mounting bracket is not compatible with certain PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD LED Plasma Max 165Lbs, 37~65inch $46.28 Adjustable Tilting Wall Mount Bracket for LCD LED Plasma (Max 165Lbs, 37~65inch) – Wide This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 37 to 65 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display sits about 4 inches off the wall when set in parallel. The mount includes simple to align brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. Warning: This mounting bracket is not compatible with certain PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting Wall Mount Bracket for LCD Plasma (Max 30Lbs, 10-26inch) $15.02 This high quality tilting wall mount is perfect for computer monitors or small televisions. Featuring a low profile design that sits 1.65 from the wall and the ability to tilt up to 15 degrees, this mount is as functional as it is visually appealing.

Adjustable Tilting and Low Profile Bracket (2 sets) for LCD Plasma (Max 165Lbs, 42~70inch) TV Wall Mounts. $34.49 Lion Strong oem SHB-032M2 Low Profile Bracket 2 sets for LCD Plasma Max 165Lbs, 32~ 60 inch TV Wall Mounts. This is Angle Adjustable and Low Profile Wall Bracket for LCD Plasma. This Flat Wall Mount supports most 32 to 60 flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The back of the display can sit about 1-3 inches off the wall when set in parallel using the low profile or tilt mount. The mount includes simple to align Tilt and a Set of Low Profile brackets and a unique wall plate that can be mounted to various wall constructions including wood studs or concrete. SPECIFICATIONS for SHB-032M2 Type Tilting and Low Profile, Minimum VESA 100X100, Maximum VESA 1050×450, Maximum Weight 165 lbs, minimum Req. Displa y Size 32 Maximum Req, Display Size 60 Minimum Extension 0 and 3 inches, Tilt -15 deg +15 deg Tilt: 0 deg. Construction Steel. Wall Plate Dimensions 30 x 8 7/8 Front Plate Dimensions. Built In Level yes, Notes: Extra wide. Compatibility: Will fit most small to mid-sized flat panel plasma and LCD TVs with mounting patterns up to VESA. Mounting holes on television should be 30 inches or less apart horizontally and 18.5 inches or less apart vertically. Maximum weight capacity: 165lbs/75kg. Included in Box – Mount, Mounting hardware, User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in or mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75 mm apart horizontally and 75 mm apart vertically.

Adjustable Tilting/Swiveling TV Wall Mount Bracket 32~55~60 LCD PLASM 250lbs. Arm Extension 5 -30 w/bracket. $68 Lion Strong oem SHB-113M TV Mounts for Flat Panel Display for 32,42, 52, 55, 60 inches at the lowest price. LCD PLASM 250lbs, Wall Plate 24 inches. Arm Extension 5-30 inch with bracket.One of the big selling points of flat panel displays is the ability to mount it on a wall with 24 inch STUDS for strenght and stability. Consumers are spending large sums of money to acquire this new technology. So, it?s no wonder people are willing to spend hundreds of dollars on a reliable wall mount to ensure that their investment is securely braced to the wall. Other wall mount manufacturers are more than willing to take advantage of the situation. Compatibility Will fit most large flat panel plasma and LCD TVs with mounting patterns up to VESA 720X480. Mounting holes on television should be 30 inches or less apart horizontally & 19.75 inch or less apart vertically. Maximum weight capacity: 250lbs. Dimensions Front plate: 30 x 9 3/8, Wall plate: 24 x 11 inches, Swivel:120 to +120 degree Extension from wall 25 inches. Extension with bracket from wall 30 inches. Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion. Tilt: -15 to +15 degree up and down. Swivel: -120 to +120 degree side to side Extension from wall: about 5 to 25 inches. Design & Construction: Solid 2.5mm heavy-gauge cold steel construction Durable powder-coated finish in black Easy installation. Included in Box. Mount Mounting hardware, User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in or mm. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically.

Adjustable Tilting/Swiveling TV Wall Mount Bracket 32~60 LCD PLASM 250lbs. Arm Extension 5 -30 w/bracket. $79.99 Lion Strong oem DC113NB24P TV Mounts for Flat Panel Display for 32,42, 52, 55, 60 inches at the lowest price. LCD PLASM 250lbs, Wall Plate 24 inches. Arm Extension 5-25 inch with bracket.One of the big selling points of flat panel displays is the ability to mount it on a wall with 24 inch STUDS for strenght and stability. Consumers are spending large sums of money to acquire this new technology. So, it?s no wonder people are willing to spend hundreds of dollars on a reliable wall mount to ensure that their investment is securely braced to the wall. Other wall mount manufacturers are more than willing to take advantage of the situation. Compatibility Will fit most large flat panel plasma and LCD TVs with mounting patterns up to VESA 720X480. Mounting holes on television should be 30 inches or less apart horizontally & 19.75 inch or less apart vertically. Maximum weight capacity: 250lbs. Dimensions Front plate: 30 x 9 3/8, Wall plate: 24 x 11 inches, Swivel:80 to + 80 degree Extension from wall 20 inches. Extension with bracket from wall 25 inches. Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion. Tilt: -15 to +15 degree up and down. Swivel: – 80 to + 80 degree side to side Extension from wall: about 5 to 25 inches. Design & Construction: Solid 2.5mm heavy-gauge cold steel construction Durable powder-coated finish in black Easy installation. Included in Box. Mount Mounting hardware, User manual. How do I measure my TV’s VESA standard. Look for the 4 mounting holes on the back of your flat screen television. Take both a horizontal and vertical measurement in mm or inches. This is your VESA Standard. A VESA hole pattern is measured in both horizontal and vertical distance between mounting holes. For example, VESA 75 x 75 means your TV mounting holes are 75mm apart horizontally and 75mm apart vertically.

Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Max 125Lbs 32 -52 $62.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma – Corner Friendly (Max 125Lbs, 32~52inch) (REV.2.0) One of the big selling points of flat panel displays is the ability to mount it on a wall. Consumers are spending large sums of money to acquire this new technology. So, it’s no wonder people are willing to spend hundreds of dollars on a reliable wall mount to ensure that their investment is securely braced to the wall. Other wall mount manufacturers are more than willing to take advantage of the situation. However, MPI prides itself in its ability to bring the greatest value to its customers. Case in point, our new Model RLB-102B wall mount may be one of our most expensive offering yet, but is still well below $100 and far below comparable offering by our competitors. This mount bracket offers the high quality, all steel construction with a longer single arm design instead of the dual arm. This allows for greater flexibility and range of motion since the arm is longer and not limited by a second arm. Corner friendly design due to extension arm orientation. Check out the images! This mount is only compatible with standard 16 on center stud spacing. It will NOT work for studs that are spaced farther than 16 . Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Max 132Lbs 13 -37 $82.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma (Max 132Lbs, 13~37inch) The MLB-156S is a perfect acticulating wall mount for small and relatively large sized displays. It features a cantilever arm that allows you to adjust your display in a wide variety of angles, while providing smooth and easy movement motion. Easy installation and smooth motion makes this mount a joy to use. Corner friendly design due to extension arm orientation. Sturdy steel construction. Durable black powder coat finish. Easy adjustments. VESA compliant 100×100, 200×100, and 200×200. 132Lb weight capacity NOTE: FOR DISPLAYS WITH VESA 100mm x 100mm (M4 screw only), 200mm x 100mm, 200mm x 200MM (M4 or M6 screw) MOUNTING PATTERNS ONLY! Check to see how far apart the mounting holes are on your display. This mount will only fit displays that have holes that are 100mm or 200mm apart left to right and top to botton. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Max 175Lbs 32 -60 $74.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma (Max 175Lbs, 32~60inch) (REV.2.0) One of the big selling points of flat panel displays is the ability to mount it on a wall. Consumers are spending large sums of money to acquire this new technology. So, it’s no wonder people are willing to spend hundreds of dollars on a reliable wall mount to ensure that their investment is securely braced to the wall. Other wall mount manufacturers are more than willing to take advantage of the situation. However, MPI prides itself in its ability to bring the greatest value to its customers. Case in point, our new Model PLB-110B-ME-R wall mount may be one of our most expensive offering yet, but is still well below $100 and far below comparable offering by our competitors. This mount is made from high quality materials including heavy gauge steel plates and arms. This mount is only compatible with standard 16 on center stud spacing. It will NOT work for studs that are spaced farther than 16 . Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Max 30Lbs 10 -24 $26.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma (Max 30Lbs, 10~24inch) The MHA-100 Adjustable Tilting/Swiveling Wall mount bracket gives you a rock solid platform to mount your flat panel display onto. The long cantilever arm provides smooth and easy movement and a wide range of motion. Display mounting arms easily adjust to fit a wide range of mounting patterns. Supports VESA :: 75×75 or 100×100 Max Load Capacity :: 30 lbs Min / Max Extension :: 2.5 – 13.5 *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma Max 110Lbs $69.99 Adjustable Tilting/Swiveling Wall Mount Bracket for LCD LED Plasma Corner Friendly (Max 110Lbs, 32~60inch) – BLACK (No Logo) This strong and robust TV wall bracket allows maximum flexibility for installing and viewing your TV. Ideal for corners. It allows you to tilt, twist and swivel your TV into nearly any position you desire. Also has adjustment for lateral positioning. Backplate measures 45cm wide giving numerous fixing points, ideal for stud walls. Corner friendly design due to extension arm orientation. Check out the images! Features an extra long extension arm that can reach out up to 28.3 . PID# 4563 extends 19.6 . This mount is only compatible with standard 16 on center stud spacing. It will NOT work for studs that are spaced farther than 16 . Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004) *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Articulating Swivel Tilting TV Wall Mount for Sony BRAVIA 22 32 inch LCD LED Flat Panel HDTV 1V0 $26.99 The silver BYML520SA3 articulating long arm extension tilt wall mount bracket fits most Sony BRAVIA 22 32 inch LCD LED Plasma Flat Panel Screen HDTV perfectly (Please check VESA and weight). It compatible with Sony BRAVIA: KDL-22BX300 KDL-22EX308 KDL-32BX300 KDL-32EX308 KDL-32EX400 KDL-32EX40B KDL-32EX500 KDL-32EX600 KDL-32EX700. The flexible mount is the best choice for most ambiences with its versatility. It features heavy duty steel construction together with lightness and quick installation. Easy adjustable tilt, swivel, swing, and extension offer multiple viewing positions. Go ahead and order it now! For TVs with M4, M5, M6 threaded holes.

Balt Blt-27543 Mobile Plasma/lcd Display Stand – Steel, Metal – Gray, Aluminum (blt27543) $238.51 Mobile Plasma/LCD Stand is sold in two parts. One part includes a wooden base middle shelf metal assembly brackets and assembly hardware. The other part includes vertical metal pedestal Plasma/LCD mount and assembly hardware. Screen tilting mechanism allows you to tilt screen up to 30 degrees. Equipment such as a DVD player can be stored on 18 wide x 14 deep audio visual shelf. H-Style mounting bracket holds up to a 42 screen and is height adjustable in 2-1/2 increments. Plasma/LCD Stand is made of 18-gauge steel and finished in a brushed aluminum powder coat for durability. Base protects against tipping and is finished in durable gray high pressure laminate. Base measures 30-1/2 wide x 29-1/2 deep x 2-1/2 high. LCD stand includes 4 swivel urethane casters (two locking) for mobility. Stand weighs 105 lb. Must order both cartons for complete unit.

CMPLE 1040-N LCD Monitor-Plasma TV adjustable Swingarm Bracket Mount 10 in.-32 in. $37.25 LCD Monitor/Plasma TV adjustable Swingarm Bracket Mount 10 -32 This attractive articulating wall mount features dual long extention arm with a ball and socket throat that allow it to be angled in multiple directions. The sturdy wishbone style arm provides a rigid hold. The high adjustable wall assembly allows you to set it at the perfect height.. For 10 -23 LCD TV. Tilting & Swivel Wall Bracket Mount. Include VESA Adaptors. Tilt: 15 degree up/down Swivel: 180 degree. TV to Wall: 884088mm. Aluminum Materials. Fast Simple Wall Mounting. Loading Capacity: 33lbs 15kgs.

CMPLE 1043-N LCD Bracket Mount 10 in.-32 in. $28 LCD Bracket Mount 10 -32 This unique swing arm will increase your Plasma TV/monitors Flexibility and conserve your table space. It will give your TV/monitor flexibility of 15 degrees up/down and swivel of 30 degrees. Easy to install no professional help required.. For 10 -32 LCD TV. Tilting & Swivel Wall Bracket Mount. Tilt: 15 degree up/down. Swivel: 30 degree. TV to Wall: 97mm. Aluminum Materials. Fast Simple Wall Mounting. Loading Capacity: 44lbs 20kgs.

CMPLE 1044-N Ultra Slim Tilting Bracket 37 in.to 63 in. Black $26.75 Ultra Slim Tilting Bracket 37 to 63 BlackThis universal ultra slim bracket is perfect for any LCD TV from 37 up to 63 . Bubble level integrated to insure straight angle installation. Its ultra slim design lets it hold the TV as close as 46mm from the wall.. For 37 – 63 Plasma & LCD TV. Tilt: -10 0. TV to Wall Distance ONLY 46mm. Super Low Profile Tilting Wall Bracket. Max. hole pattern 820mm wide and 410mm high. Bubble level integrated. Load Capacity: 165lbs 75kgs. Color: Black.

CMPLE 1045-N Tilting Wall Bracket 32 in.- 65 in. Black $41 Tilting Wall Bracket 32 – 65 BlackGetting an adjustable wall mount that would allow you to have the optimum viewing angle usually meant settling for a bulky mount that protruded several inches from the wall.. For 32 – 63 Plasma & LCD TV. Tilt: -15 0. Max. hole pattern 770mm wide and 480mm high. Universal mounting pattern. Loading Capacity: 165lbs 75kgs.

CMPLE 1046-N LCD Monitor-Plasma TV Adjustable Swing Arm 180 degree 10- 32 in. Black $28 LCD Monitor/Plasma TV Adjustable Swing Arm 10 – 32 BlackThis practical swing arm will increase your Plasma TV/monitors Flexibility and conserve your table space. It will let you tilt and swivel your TV/monitor to the required angle .Easy to install no professional help required. Bubble level integrated to insure straight angle installation.. For 10 -32 LCD TV Tilting & Swivel Wall Bracket Mount. Tilt: -15 +15 Swivel: 180 degree. Reach: TV to Wall: 96456mm. Include VESA Adaptors. Aluminum Materials. Fast Simple Wall Mounting. Loading Capacity: 44lbs 20kgs. Color: Blackbr.

Ceiling Bracket for 10~37inch LCD LED with Tilting $37.66 Ceiling Bracket for 10~37inch LCD LED with Tilting Ceiling drop mount for 10 to 37inch Flat Panel Displays.This high quality steel ceiling mount features heavy duty steel construction and a drop length of (34.23 to 61.39 ).Mounting plate is compatible with VESA 75/100/200/200x100mm.Maximum load weight is 66lbs (30kg)Satin Silver painted finish.All mounting hardware included.IMPORTANT: Mount comes with anchors designed for stone, concrete and hollow block. No wood mounting solutions are provided. You are responsible for providing your own solutions to mounting to wood beam ceilings. We apologize for any inconvenience. *MPI continually strives to improve it’s product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Ceiling Bracket for 17~37inch LCD LED without Tilting $37.9 Ceiling Bracket for 17~37inch LCD LED without Tilting Ceiling drop mount for 17 to 37inch Flat Panel Displays.This high quality steel ceiling mount features heavy duty steel construction and a drop length of 870mm to 1560mm (34.23 to 61.39 ).Mounting plate is compatible with VESA 75/100/200/200x100mm.Maximum load weight is 66lbs (30kg)Satin Silver painted finish.All mounting hardware included.*MPI continually strives to improve it’s product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.

Cotytech Dual Monitor Desk Mount – Dual Swing Arm $200.08 PGY1034: The multi monitor desk mount is ideal for classromms, offices, homes, public area, industrial settings, production line and many more. This multiple display desk mount renders maneuverability, flexibility and a chic look that is sure to flatter your LCD monitor. The mounting bracket boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech dual monitor desk mount has been built with the end user in mind, and features easy installation while offering intuitive, practical and functional design from one of the leading manufacturers of desk mounts. Features: -Available in Clamp or Grommet bases. -Construction: Solid aluminum alloy. -Clean look with minimal hardware visible from underside of work surface. -Increase efficiency by using multiple applications simultaneously, eliminating toggling back and forth between documents and programs. -Simultaneously lift LCD screens to suitable heights for supreme ergonomic comfort. -Unique 360 swiveling feature allows users to share screen with their close neighbour or the one across the desk ,making this perfect for selling and training environments. -Maximum adjustment rendered by tilting, swiveling, pivoting and height adjustment. -Dual arms, supports two LCD flat panel displays at the same height. -Portrait and landscape rotation. -Smooth, fingertip tilt in all directions. -Maximum productivity and comfort. -Assembly required. Specifications: -Supports up to 2 x 24 LCD monitors. -Tilt: -30 / 30 . -Swivel: Max 360 . -Rotation: 360 (portrait or landscape). -Maximum arm extension: 21 for each monitor. -Fits up to 2.6 thickness table top. -Mounting Pattern: VESA compliant (75×75 and 100×100). -Weight capacity: Supports up to 22 lbs for each monitor.

Cotytech Hexa Monitor Desk Mount – Full Swing $663.3 PGY1046: Cotytech Hexa Monitor Desk Mount is a completely full motion LCD monitor mount, 4 with triple arms, 2 armless brackets. It is ideal for offices, public area, bank, stock market, surveillance unit, industrial settings, production line and many more. This multiple display desk mount renders maneuverability, flexibility and a chic look that is sure to flatter your LCD monitor. The mounting bracket boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech hexa monitor desk mount has been built with the end user in mind, and features easy installation while offering intuitive, practical and functional design from one of the leading manufacturers of desk mounts. Features: -Available in Clamp or Grommet bases. -Construction: Solid aluminum alloy. -Clean look with minimal hardware visible from underside of work surface. -Increase efficiency by using multiple applications simultaneously, eliminating toggling back and forth between documents and programs. -Maximum adjustment rendered by tilting, swiveling, pivoting and height adjustment. -Portrait and landscape rotation. -Smooth, fingertip tilt in all directions. -Unique 360 swiveling feature allows users to share screen with their close neighbour or the one across the desk ,making this perfect for selling and training environments. -Maximum productivity and supreme ergonomic comfort. -Supports six LCD monitors up to 29 , each with independant height adjustment. -Assembly required. -Triple arm length: 29.5 . Specifications: -Tilt: 30 / – 30 (armed) 15 / – 15 (armless). -Swivel: Max 360 (armed) 180 (armless). -Rotation: 360 (portrait or landscape). -Maximum extension: 29.5 for each monitor mounted on arms. -Pole length: 27.6 . -Hole diameter: 0.39 -1.97 . -Clamp table thickness: 0.79 -2.36 . -Grommet table thickness: 0.79 -2.36 . -Mou

Cotytech LCD Monitor Slatwall Mount – Double Arm $80.99 Our new Cotytech LCD Monitor Slatwall Mount – Double Arm is a tilt & swivel mount, featuring 360 degree monitor rotation, swivels left and right up to 180 degrees, tilts upwards and downwards up to 15 degrees, aluminum alloy material and weight capacity of 22lbs (10kgs). This LCD monitor slatwall mount is a full motion type that can achieve optimal viewing angles by tilting and turning. This mounting bracket is ideal for classrooms, offices, homes, public area, industrial settings, production line and many more. The monitor arm features integrated durability through state of the art engineering technology, and is tested for strength in our oversea manufacturing plant. The LCD wall mount has been built with the end user in mind, and features easy installation while offering intuitive, practical & functional design from one of the leading manufacturers of wall mounts. All our monitor mounts offer five year warranty.

Cotytech LCD Monitor Wall Mount – Pivot & Tilt $44.99 Our new LCD Monitor Pivot and Tilt Wall Mount is a tilt & swivel mount, featuring 360 degree monitor rotation, swivels left and right up to 180 degrees, tilts upwards and downwards up to 15 degrees, aluminum alloy material and weight capacity of 18lbs (8kgs). This LCD monitor wall mount is a full motion type that can achieve optimal viewing angles by tilting and turning. This mounting bracket, which fits all standard types of wall, is ideal for classromms, offices, homes, public area, industrial settings, production line and many more. The monitor arm features integrated durability through state of the art engineering technology, and is tested for strength in our oversea manufacturing plant. The LCD wall mount has been built with the end user in mind, and features easy installation while offering intuitive, practical & functional design from one of the leading manufacturers of wall mounts. All our monitor mounts offer five year warranty.

Cotytech Monitor Desk Mount $68.61 PGY1052: It is ideal for home, offices, public area, industrial settings, production line and many more. This LCD monitor desk mount renders maneuverability, flexibility and a chic look that is sure to flatter your LCD display. The mounting bracket boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech Monitor Desp Mount has been built with the end user in mind, and features easy installation while offering intuitive, practical and functional design from one of the leading manufacturers of desk mounts. Features: -Available in Clamp or Grommet bases. -Construction: Solid ABS. -Smooth extension to achieve ideal viewing angles. -Portrait and landscape enabled with 360 monitor rotation. -Maximum adjustment rendered by tilting, swiveling, pivoting and dynamic height adjustment. -Clean look with minimal hardware visible from underside of work surface. -Smooth fingertip height adjustment and fingertip tilt in all directions. -All in one cable management. -Maximum productivity and supreme ergonomic comfort. -Easy installation. -Assembly required. Specifications: -Tilt: -15 / 15 . -Swivel: 180 . -Rotation: 360 (portrait or landscape). -Maximum arm extension: 16 . -Fits table thickness: 0.7 -2.6 . -Mounting Pattern: VESA compliant (75×75 and 100×100). -Weight capacity: Supports up to 17.6 lbs.

Cotytech Triple Monitor Desk Mount – Triple Arm $293.81 PGY1027: It is ideal for classromms, offices, public area, industrial settings, production line and many more. This multiple display desk mount renders maneuverability, flexibility and a chic look that is sure to flatter your LCD monitor. The mounting bracket boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech triple monitor desk mount has been built with the end user in mind, and features easy installation while offering intuitive, practical and functional design from one of the leading manufacturers of desk mounts. Features: -Available in Clamp or Grommet bases. -Construction: Solid aluminum alloy. -Smooth, fingertip tilt in all directions; may lift LCD screens to suitable heights for supreme ergonomic comfort. -Clean look with minimal hardware visible from underside of work surface. -Three monitors can be positioned landscape or portrait, side by side straight, side by side in oval shape, one on top of two or one on each side in a circle. -Maximum productivity and comfort. -Maximum adjustment rendered by tilting, swiveling, pivoting and height adjustment. -Increase efficiency by using multiple applications simultaneously, eliminating toggling back and forth between documents and programs. -Unique 360 arm rotation feature allows users to share screen with their close neighbour or the one across the desk, making this perfect for selling and training environments. -Supports three LCD monitors up to 27 , at the same or different heights, 2 with triple-arm, 1 armless. -Assembly required. Specifications: -Tilt: 30 / – 30 (armed) 15 / – 15 (armless). -Monitor rotatio: 180 . -Swivel: Max 360 (armed), 180 (armless). -Maximum extension: 29.5 for each monitor mounted on arms. -Pole length: 19.69 . -Hole Diameter: 0.39 -1.97 . -Clamp table thickness: 0.79 -2.36 . -Grommet table thickness: 0.79